Amulet Bellus II

Key Features :

X-ray conversion method Direct-conversion
X-ray comversion material a-Se
Detector Hexagonal Pixel
Effective image area (on the flat panel sensor) 236.4 mm (vertical) x 296.4 mm (horizontal) (9.31 in. x 11.7 in.)
Pixel resolution 50 x 50 μm/pix

Tube voltage range 22 kV to 49 kV (1 kV intervals)
Tube voltage accuracy ±1 kV
mAs setting range Large focus: 2 mAs to 600 mAs, Small focus: 2 mAs to 300 mAs
mAs setting precision ±10% ＋0.2 mAs
Anode angle Large focus: 16°, Small focus: 10°
Anode material Tungsten (W/Re)
X-ray leakage radiation < 100 mR/h (49 kV at a distance of 1 m (39.4 in))
Total filtration of X-ray generator 0.7 mmAl
Total filtration of tube assembly 0.63 mm Be

Swivel arm

Vertical travel 690 mm to 1,500 mm (27.2 in. to 59.1 in.) (height of the exposure table at 0º)
Rotation +190° to -190°
SID 650 mm (25.6 in.)

Compression Modes

Electric Compression 0 N to 200 N, 0 N to 200 N (+190° to ＋50°, －50° to －190°)
Manual Compression 0 N to 230 N (＋50° to －50°)

Grid

Moving focused grid Aspect ratio 6:1 41 lines/cm, Film material: Pb, intermediate material: fiber
Tomo

Tomosynthesis

Exposure angle ST mode : ±7.5°
HR mode : ±20°
Output pixel size (slice image/S-View (optional)) ST mode: 150 um x 150 um (100 um x 100 um can also be set)
HR mode: 100 um x 100 um (50 um x 50 um can also be set)
Exposure time ST mode: Approx. 4 seconds
HR mode: Approx. 9 seconds

Biopsy Positioner Function

Image size 70 mm x 60 mm (2.75 in. x 2.36 in.) (Top surface of the exposure table)
Positioner drive system Electric (AUTO, Manual)
Positioner weight 5.5 kg (12.13 lb) or less
Stereo angle ±15º

Bellus Workstation

Amulet Innovality Tomosynthesis Biopsy With Bellus Workstation Configuration